Motor:
Continuous-duty, high starting torque
motor with overload protection. Available in 1/3, 1/2, 3/4
and 1 HP; single or three phase. Removable without affecting
limit switch settings.
Drive Reduction:
First stage heavy-duty 5L V-belt; second
stage and output on trolley #41 chain.
Emergency
Disconnect: Spring-loaded
disconnect for emergency manual operation.
Wiring Type:
C2, B2, D1 and E2 wiring types are all
standard and easily selectable using the Logic Control Board
(L). T and TS wiring can be activated with the use of the
CPS II option board. Reversing Contactor Units (M) have C2
wiring standard and B2 available by simply moving a jumper
wire. All comparison door garage openers are pre-wired to accept a sensing edge,
photoelectric control, radio controls and most types of
access control equipment.
External Radio
Control Terminal: External
terminals provide quick, convenient connections for radio
controls.
Bearings: Ball bearings on
output shaft; heavy-duty, oil filled bushings on reduction
shafts.
Friction Clutch:
Adjustable friction clutch helps protect
against major damage to door and operator should the door
meet an obstruction.
Pushbutton Station:
3-button station for OPEN/CLOSE/STOP
functions is standard for all operators. Controls with one,
two and three buttons are available.
Construction:
comparison door garage opener NEMA 1 Type
electrical box, heavy-duty 11-gauge steel frame with durable
powder coat finish, all reduction sprockets drilled and
pinned to shafts.
Rail Assembly:
High strength dual L-rail track with
exclusive nylon quiet gliding chain guides on rail spacers
for quiet, smooth operation. Includes heavy-duty wall mount
brackets for rail and operator.
Brake:
Solenoid-actuated brake is standard on 3/4
HP and higher.
Standard on
the MyGarageStuff Logic Control (L):
Maintenance
Alert System: This important comparison door
garage opener feature provides an
accurate method for tracking door use and establishing safe
and effective maintenance programs for the door and the
operator. The Maintenance Alert System features an internal
programmable cycle timer that actually counts each time the
door cycles. This system is easily preset by the installer
for the particular door and application. Once the preset
number is reached, an indicator light on the 3-button
station flashes to signal that it is time for routine door
and operator maintenance.
Maximum Run Timer: This
standard feature on the Logic Control Board (L) is designed
to protect against damage to the door and comparison door
garage opener . Simply
set the system to auto learn the door's standard cycle time.
Any time a moving door takes 10 seconds more than its
programmed standard cycle time, the door will automatically
stop. The maximum runtime for the default is 90 seconds.
Delay-on-Reverse Circuit
Programmable
Mid-Stop
Control
Accessories and Options:
CPS® Photo
Sensor System: (Recommended) An inexpensive
"non-contact" photo safety sensor designed to sense an
obstruction and signal the door operator to reverse to open.
Sensing Edge:
(Recommended) Designed to sense an
obstruction and signal door operator to stop or reverse as
desired. Either an electric or pneumatic sensing device can
be added to bottom edge of door.
Radio Control:
Universal transmitters and receivers are
available to signal the operator to open and/or close door.
Bi-Parting Door
Hardware: Modification
includes hardware to use comparison door garage opener Model SD on bi-parting door.
Key Switch:
Designed to restrict operation of door to
authorized personnel only. Various types available.
Available Plug-In Option Boards for the Solid State Logic
Control Board (L):
CPS
IICommercial Protector System II: (Recommended)
comparison door garage opener Features our powerful photo sensors to provide a UL approved
self-monitoring operator for commercial door applications.
4-wire or 2-wire "fail-safe" edges may be used. Board also
contains a Timer-to-Close function.
Timer-to-Close
Option: Part of the CPS II
board. It provides the ability to close the door at a
programmable time from 5 seconds up to 1 hour. Combined with
the CPS II board for the convenience of a timer and the
safety necessary to protect an auto closing door.
Auxiliary Contact
Option Board: comparison
door garage opener Features both normally-open and
normally-closed contact that actuate when unit is powered
down. Can be used to signal security systems, operate
heaters, warning devices or other ancillary devices (5V to
240V).
Warning Signal
Option Board: Provides
apartment warning light function for use with red/green
light module (included). Will support audio warning devices.
Will provide warning prior to closing wh
